Please note, that these features are maintained by its creators, therefore any suggestion for an improvement or bug should be reported directly to them. Thanks to their effort, this release adds more new features. We would like to thank the community for their support and additions to the code base. activate the MMU in Settings -> MMU first.don't start the Wizard after the Factory reset.If you want the Wizard to test the MMU as well: After a Factory reset the Wizard will run without the MMU. The MMU is by default disabled and has to be enabled in LCD menu Settings -> MMU. Since the printer firmware and MMU firmware need to be able to communicate, the firmware versions are checked and need to be in a compatible combination. ![]() There is a continuous two-way serial communication between the printer and MMU which improves the printer “knowing” what state the MMU is. Last line shows actions the user can select and selecting the double downward arrow shows more detailed offline information about the issue. ![]() Showing the FINDA, Filament sensor, tool operation and temperature helps to identify issues. A short title shows the issue and a web link prusa.io/04xxx code for more information. The auto-retry feature solves a lot of minor issues with filament sensors.Īll issues/errors are shown on the LCD screen. In case of an issue the firmware will try to solve the problem on its own before pausing the print and waiting for user interaction. The MMU3 firmware brings multiple improvements across the board. Running a combination of older 3.12.2 with newer 3.0.0 or newer 3.13.0 with older 1.0.6 will not work correctly due to major changes in both firmwares for the MMU (2S or 3) unit and the printer.Ĭombinations of older hardware like MMU2S with MK3S or MK2.5S with the latest firmware (3.13.0 and 3.0.0) should work and will be soon explained in the article about MMU3 firmware compatibility at. 3.13.0 + 3.0.0 (firmware combination starting this release).3.12.2 + 1.0.6 (firmware combination valid until this release).Due to major changes, both firmwares must be updated and can't be combined with any previous releases. One firmware is designed for the MMU (2S or 3) unit, the other one is for the printer. It is important to distinguish between two types of firmware. A detailed description of the architecture, automatic procedures, registers and many more will be described in the upcoming dev diary. The firmware for the MMU3 unit is completely new (rewritten from scratch). This is the final release of the firmware 3.13.0 focused on adding support for MMU3, extending the thermal model with support for Revo nozzle and several other improvements. First Layer Calibration - nozzle diameter.Do not preheat the heatbed on load/unload. ![]() Here is the firmware for the MK series (2.5 - 3S+) of the printer AND the MMU3 firmware Summary 3.13.0 Printer Firmware for MK3, MK3S, MK3S+, MK2.5 and MK2.5S and MMU3 3.0.0 firmware
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |